Cleaning machine products

burks BKS Series High-Pressure Washer

Product description: burks BKS series high-pressure washer includes ten electric 380V models and four gasoline-driven models, 14 models in total, with maximum pressure from 16 to 50MPa, suitable for industrial cleaning, e
INQUIRY

Product Overview

The BKS series high-pressure washer includes ten electric 380V models and four gasoline-driven models, totaling 14 models. The electric models have a speed of 1450r/min and an inlet water temperature of 0-40℃, suitable for industrial cleaning, equipment and floor cleaning, rust and dirt removal, municipal sanitation, and other scenarios.

Model Description

BKS + pressure (MPa) + flow rate (L/min), e.g., BKS-2515 indicates a maximum pressure of 25MPa and a flow rate of 15L/min; models with a B suffix are explosion-proof motor types. The naming of gasoline models does not fully follow this rule; refer to the parameter table.

Technical Parameters

Model	Maximum Pressure (MPa)	Rated Pressure (MPa)	Flow Rate (L/min)	Power	Drive	Speed (r/min)	Inlet Water Temperature (℃)
BKS-1615	16	14	15	3.0KW	380V	1450	0-40
BKS-2015	18	16	15	4.0KW	380V	1450	0-40
BKS-2016	20	18	16	5.5KW	380V	1450	0-40
BKS-2515	25	22	15	7.5KW	380V	1450	0-40
BKS-3120	31	26	20	10KW	380V	1450	0-40
BKS-3021	30	27	21	11KW	380V	1450	0-40
BKS-3524	35	30	24	15KW	380V	1450	0-40
BKS-4017	40	38	17	15KW	380V	1450	0-40
BKS-5015	50	45	15	15KW	380V	1450	0-40
BKS-5024	50	45	24	22KW	380V	1450	0-40
BKS-3000	20	18	12.6	6.5HP	Gasoline	1450	0-40
BKS-3400	24	22	15	9HP	Gasoline	1450	0-40
BKS-3600	25	23	17	13HP	Gasoline	1450	0-40
BKS-3055	20	15	50	24HP	Gasoline	1450	0-40

The above models are not all models. More parameters and specifications can be customized. Please consult for confirmation.

Usage Points

Never operate without water; never point the high-pressure spray gun at people, animals, electrical equipment, or the equipment itself; the equipment must be installed with a leakage protection device; wear protective goggles, gloves, and other labor protection supplies during operation; protect against freezing below 0℃: place in a warm room (above 0℃) or drain the water from the equipment; use only normal-temperature clean water, and do not pump liquids containing solvents or undiluted acids and alkalis.

Maintenance Schedule

Before each operation	Check the oil level of the high-pressure pump, check the fuel level for fuel-driven equipment, check the high-pressure hose for damage (replace immediately if damaged)
Weekly	Clean the filter on the water connector; check the tire pressure of the wheels
Within the first month or after the first 30 hours of operation	Replace the high-pressure pump oil (motor oil L-AN46~48, fill to two-thirds of the oil level indicator); for fuel-driven equipment, also replace the engine oil
Fuel-driven equipment	Clean the engine air filter every 50 hours; replace the engine oil, check and clean the spark plug, and check the fuel filter every 100 hours; replace the high-pressure pump oil every 150 hours; check/adjust the engine valve clearance every 300 hours; replace the spark plug and air filter element annually or every 500 hours